The Aderis ClearSky PLUS™ Interconnection is designed to electrically terminate in the same manner as a pad-mounted transformer. Here’s what you can expect.

Overview

The Aderis ClearSky PLUS is designed to be very easy to install, requiring medium voltage (MV) separable connectors, low voltage (LV) lugged terminations, and ground-ring terminations.

Details for your MV Contractor:

• There are a total of six (6) MV separable connector terminations required
• The MV separable connectors will be either 200A load-break or 600A dead-break IEEE 386 compatible interfaces
• Whether 200A or 600A, all bushing wells and inserts will be shipped with the device … your MV contractor only needs to purchase and install the “elbows”
• Parking stands are installed for all six (6) connections, however parking bushings are not included (as these are not required for normal commercial operation)
• The MV Termination Cabinet and the LV Termination Cabinet each have a solid copper 3/8” diameter rod installed across the bottom opening of the cabinet entry. The ground ring will need to be attached to the grounding rod per applicable standards where the Aderis ClearSky™ PLUS is being installed.

                                                      MV Termination Cabinet        

200A Bushing Wells Capped for Shipping200A Inserts Shipped w/ Device (Not Shown)

                                                       LV Termination Cabinet                          

                    *Secondary Voltage Connections ForLugged #2 AWG Cu Middle-Right*

                                    Solid 3/8” Diameter Copper Grounding Rod
           *Common in Both Termination CabinetsCustomer Installed Irreversible Crimp Shown*